Inflatable Castle Bounce House

inflatable castle bounce house is an air filled entertainment facility with Castle characteristics. It is made of PVC fabric with friendly and soft environment. In the sealed state, the product is maintained by continuous supply of blowers. Provide happiness for children. Because of its lovely and unique shape, it is loved by children. Also known as: inflatable castle, children's castle, inflatable trampoline, inflatable slide, children's Park and so on.

Send Inquiry
Product Details

inflatable castle bounce house

Brand Name KK Iinflatable
Size customized
PVC thickness/Width 0.55mm/2.06mm
PVC tenside strength 2732 warp
PVC tear sthength 391 warp s
Printing technology Digitally printing or hand printing is available
Blower 220-240v / 110-120v / CE /UL
AccessoriesBlower safety rules carry bags repair kits spikes ramp banner card holder
Packing0.55mm Plato PVC durable for inflatable products exported standard carton for blower
Price depends on the quality, quantity and the size demands
Certification CE, EN14960, SGS, UL, ROHS
Minimum Order Quantity 1 piece
Lead time7-10 days for small order, 20-25 days for bulk order.
Payment Terms T/T40% deposit and 60% before delivery
Warranty 3-5 years

Exquisite workmanship, strict requirements

1. Dirty: Finished product surface is bright, do not allow dirt on the surface, such as: footprints, ballpoint pen lines, dust, glue marks, etc.

2. deformation: deviate from the original shape and size. The difference between the deviations is less than 1cm.

3. burrs: the highest and lowest positions in cutting should not exceed 1.5mm in 30cm.

4. scratch: the surface of the finished product should not be scratched.

5. warpage: the horizontal or vertical deviation between the front and rear parts of the product is not greater than 5cm within 3 meters.

6. the interface and seal are uneven: the 90cm2 prominence and normal vertical height are not higher than 0.5cm.

7. wrinkle: the difference between 1 meters is controlled in 0.5cm.

8. screen printing: the printing is clear and the edges are not blurred.

9. splice position: the difference of splicing edge is controlled at 1.0mm outside 1.2mm of wheel rim.

10. color: the difference of color of the same color material is not obvious difference at 2 meters.

11. rubber edge protrusion: the right and left position of splicing should be controlled at 0.5mm and should not be used before and after.

12. surface: the finished product standard summarized above. Due to the reasons of display, photo and other reasons, the product may have fine color difference.

KK Inflatable advantages :

This product is suitable for park, community square, city square, tourist attractions, shopping malls, department stores and other investment and operation, low cost and high return, is a good project for your small venture capital. According to our customers'reaction, an inflatable castle usually has an income of nearly 500 yuan a day. If it is put in a good place, it has an income of nearly 1000 yuan a day. As soon as the market was launched, there was a lot of excitement.

Installation instructions

1. Place the equipment on the flat ground, place a mat under the equipment (such as felt, plastic stripe cloth), and then unfold it.

2. Find the air inlet of the equipment, then connect it with the air outlet of the fan, and tie the air outlet tightly, then tie the spare air inlet tightly with rope.

3. connect the blower to power, and the equipment will bulge in 5-10 minutes.

Auxiliary fan installation:

1. Choose the 1.5mm2-4 mm2 cable line of national standard to connect with the fan for several meters, and connect the air switch at the other end, and connect the electric shock protector.

2. before use, check whether the power supply voltage is consistent with the nameplate and whether the rotation direction is correct.

3. The casing should be connected to a reliable ground wire, and regular inspection, the fan's air inlet into the protective screen, in order to avoid accidents.


material advantages.jpg

Welcome to call for consultation or customization.

10% discount for new order, 15% discount for reorder!

Get an inquiry now at; MP&Whatsapp&Wechat: +15920316762

Good quality and low price

Hot Tags: inflatable castle bounce house, manufacturers, suppliers, factory, customized, price