Inflatable Barrier Equipment Water Park
Water inflatable trampoline, also known as inflatable trampoline, water bouncing bed, can be placed in the water and land use, visitors can stand on the top of the free jumping, can exercise the athlete's body coordination and balance ability. It is a water amusement equipment with a strong stimulation and interesting interest.
Inflatable barrier equipment water park
|Brand Name||KK Iinflatable|
|PVC tenside strength||2732 warp|
|PVC tear sthength||391 warp s|
|Printing technology||Digitally printing or hand printing is available|
|Blower||220-240v / 110-120v / CE /UL|
|Accessories||Blower safety rules carry bags repair kits spikes ramp banner card holder|
|Packing||0.55mm Plato PVC durable for inflatable products exported standard carton for blower|
|Price||depends on the quality, quantity and the size demands|
|Certification||CE, EN14960, SGS, UL, ROHS|
|Minimum Order Quantity||1 piece|
|Lead time||7-10 days for small order, 20-25 days for bulk order.|
|Payment Terms||T/T40% deposit and 60% before delivery|
Inflatable barrier equipment water park image：
Exquisite workmanship, strict requirements
1. Dirty: The finished product has a bright surface. No dirt is allowed on the surface, such as footprints, ballpoint pen lines, dust, glue marks, etc.
2. deformation: deviate from the original shape and size. The difference between the deviations is less than 1cm.
3. burrs: the highest and lowest positions in cutting should not exceed 1.5mm in 30cm.
4. scratch: the surface of the finished product should not be scratched.
5. warpage: the horizontal or vertical deviation between the front and rear parts of the product is not greater than 5cm within 3 meters.
6. the interface and seal are uneven: the 90cm2 prominence and normal vertical height are not higher than 0.5cm.
7. wrinkle: the difference between 1 meters is controlled in 0.5cm.
8. screen printing: the printing is clear and the edges are not blurred.
9. splice position: the difference of splicing edge is controlled at 1.0mm outside 1.2mm of wheel rim.
10. color: the difference of color of the same color material is not obvious difference at 2 meters.
11. rubber edge protrusion: the right and left position of splicing should be controlled at 0.5mm and should not be used before and after.
12. surface: the finished product standard summarized above. Due to the reasons of display, photo and other reasons, the product may have fine color difference.
Welcome to call for consultation or customization.
10% discount for new order, 15% discount for reorder!
Get an inquiry now at email@example.com; MP&Whatsapp&Wechat: +15920316762